Furnace & heating
Heat pumps
Ductless mini splits
Carrier
TraneSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Woodland Hills Homeowners
When your furnace quits on a cold Woodland Hills night, you need someone who shows up, fixes it, and charges what they said they would. For fast local service, call our Furnace Repair - Woodland Hills team. Halden Heating and Air Woodland Hills has handled furnace repair in Woodland Hills since 2004, and we run every job the same way: a written price before work starts, a live arrival time you can track, and a written guarantee on the repair. Most furnace repairs here run between $150 and $700 depending on the part and the furnace. Led by Andre Fuller, our techs service Bryant, American Standard, Carrier, and Trane units across the west Valley. If you need help now, call (559) 245-8195 and a real person answers, 24/7.
Furnace Maintenance
Furnace Maintenance is the routine servicing that keeps your heating system running clean and catching small problems before they turn into $700 repairs. In Woodland Hills, we recommend it once a year, ideally in early fall before the first cold snap hits Warner Center and the hills around Topanga. A Halden Heating and Air Woodland Hills maintenance visit runs $80 to $200 and includes a full inspection, filter check, and a written report of what we found, with photos. You get a fixed price before we start, and our techs are not paid on what they sell, so the report is straight information, not a sales pitch.
What Gets Checked
We inspect the heat exchanger for cracks, test the burner, measure the flame sensor, and check airflow across the coil. We also look at the blower motor and belt for wear that can cause a mid-season failure.
When to Book It
Book before temperatures drop below 50 at night, which in Woodland Hills usually means September or October. If you skipped last year, get on the schedule now so you are not waiting behind emergency calls in December.
Styles & brands we work with
Heat Pump Repair
Heat Pump Repair fixes the outdoor unit that both heats and cools your home by moving heat instead of burning fuel, which is common in newer Woodland Hills homes and condos around Calabasas and Oak Park. When a heat pump acts up, you might notice the outdoor unit running constantly, weak airflow, or a system that blows warm air in cooling mode. Halden Heating and Air Woodland Hills repairs heat pumps at the same $150 to $700 range, with a written price before any work begins and the 365-Day Done Right Promise backing the repair. Our techs troubleshoot reversing valves, defrost boards, compressors, and refrigerant levels on all major brands.
Reversing Valve Problems
The reversing valve is the part that flips the heat pump between heating and cooling modes, and when it sticks, you get the opposite of what you asked for. We test it with a meter before recommending replacement, because sometimes the issue is the control board sending a bad signal, not the valve itself.
Cold Weather Defrost Issues
On chilly Woodland Hills mornings, frost can build on the outdoor coil, and the unit should enter a defrost cycle to clear it. If the defrost sensor or board fails, ice builds up and the heat pump stops heating altogether, which is one of the more common calls we run in January.
Heating Repair
Heating Repair is the broad category for any issue with your home’s heating system, whether the furnace fires up, the heat pump runs, or the boiler builds pressure, and it usually starts with the same complaint: the house is cold and the thermostat is set to 70. Woodland Hills homes built in the 1950s and 60s around Winnetka and Reseda often have older ductwork and original heating equipment that needs more than a filter swap. Halden Heating and Air Woodland Hills charges between $150 and $700 for most heating repairs, with the exact written price confirmed before we touch the unit. Every repair includes a written guarantee, and if the same problem comes back, the second visit is free.
Thermostat and Wiring
A dead thermostat or a broken wire between the thermostat and the furnace can mimic a major system failure. We check voltage and continuity first, because a $30 thermostat swap beats a $600 control board replacement when that is all it is.
Blower Motor Failures
The blower motor pushes heated air through your ducts, and when it wears out, you might hear a loud hum or get no airflow at all. We test the capacitor, the relay, and the motor windings separately so we replace only the part that failed.
Boiler Repair
Boiler Repair addresses the hydronic heating systems found in some older Woodland Hills homes, particularly mid-century properties along Ventura Boulevard and the hillside homes in Topanga Furnace Repair territory, where radiators or baseboard heaters circulate hot water instead of forced air. Boilers have different failure points than furnaces: circulator pumps, expansion tanks, pressure relief valves, and zone valves. Halden Heating and Air Woodland Hills repairs boiler issues in the $150 to $700 range, with a written price before work starts and a written guarantee on the repair. If you hear banging pipes, see water around the boiler, or feel cold spots in different rooms, call us before the system loses pressure completely.
Loss of Pressure
A boiler that keeps losing pressure usually has a failing expansion tank or a small leak somewhere in the loop. We pressurize the system and check the tank’s air charge, because a waterlogged tank can cause the relief valve to dump water every cycle.
No Heat in One Zone
If part of the house stays warm while another stays cold, the zone valve for that area may be stuck closed or the thermostat for that zone has failed. We check voltage at the zone valve and the thermostat wiring before calling for a valve replacement.
Gas Furnace Repair
Gas Furnace Repair fixes the natural gas furnaces that heat most single-family homes in Woodland Hills, West Hills, and Furnace Repair in Tarzana areas, the ones with a gas valve, burners, and a flame sensor inside a metal cabinet. Common failures include a dirty flame sensor that shuts the burners down after a few seconds, a failed ignitor that prevents startup, or a cracked heat exchanger, which is a carbon monoxide risk and needs immediate attention. Halden Heating and Air Woodland Hills repairs gas furnaces between $150 and $700, with most flame sensor cleanings and ignitor replacements at the lower end of that range. If you smell gas, leave the house and call the gas company first, then call us once the line is confirmed safe.
Short Cycling Burners
When the burners light and then shut off within a few seconds, the flame sensor is usually dirty or failing and the control board thinks there is no flame. We clean or replace the sensor and verify the gas valve pressure, which takes most techs under an hour.
Cracked Heat Exchanger
The heat exchanger separates the burner flame from the air blowing into your home, and a crack lets carbon monoxide into the living space. We inspect it with a camera during every furnace repair in Woodland Hills, and if we find a crack, we shut the furnace down and give you a written repair or replacement quote before we leave.
Furnace Tune Up
Furnace Tune Up is a preventive service that cleans, tests, and adjusts your furnace so it burns efficiently and starts reliably all winter, and in Woodland Hills, it runs $80 to $200. We recommend a tune up every fall, and we see a lot of tuned-up furnaces from Encino and Agoura Hills that then run for another decade without a major failure. During a tune up, our tech checks the burners, flame sensor, gas pressure, heat exchanger, blower motor, and thermostat calibration, then hands you a written report with before-and-after photos. The report tells you what is fine, what is wearing, and what it would cost to fix, with no pressure and no upsell pitch.
Fall Tune Up Checklist
We clean the flame sensor, check the burner alignment, test the gas valve, measure temperature rise across the heat exchanger, and verify the carbon monoxide levels in the exhaust. We also check the air filter and replace it if needed, which is included in the tune up price.
After the Tune Up
You get a written summary of what we found, including photos of any worn parts and a clear recommendation if something needs attention this season or can wait. If we fix something during the tune up and it fails within the guarantee window, the return visit is free.
Emergency Furnace Repair
Emergency Furnace Repair is what happens when the heat goes out on a cold night and you cannot wait until morning, and Halden Heating and Air Woodland Hills answers the phone live at (559) 245-8195, 24/7. We run emergency furnace repair calls throughout Woodland Hills, our Furnace Repair in Canoga Park, and the surrounding west Valley, with the same written price before work starts that we use on scheduled calls. Emergency repair pricing follows the same $150 to $700 range as standard repair, with no overtime surcharge and no inflated after-hours rate. If your furnace fails at midnight in December, we will get a tech out, confirm the problem, and give you a fixed written price before a single tool is picked up.
No Heat, Cold House
A furnace that will not start at all is the most common emergency call, and it is often a failed ignitor, a tripped limit switch, or a gas valve that will not open. We diagnose it on the spot and carry the most common repair parts on the truck so we can usually fix it the same night, not just diagnose and schedule a return trip.
Carbon Monoxide Concerns
If your CO detector is going off or you notice a strange smell when the furnace runs, shut it down, open windows, and leave the house. Call 911 or the gas company first, then call us once the immediate risk is cleared, and we will inspect the heat exchanger and venting before the furnace is cleared to run again.
Brands We Service
Our Woodland Hills techs work on Bryant furnaces every week, particularly the Evolution and Preferred series, and we carry the OEM flame sensors, ignitors, and control boards that keep them running. Bryant’s modulating gas valves and variable-speed blowers are sensitive to dirty power and setup errors, so we verify gas pressure and airflow settings on every Bryant repair, not just the failed part.
American Standard units, especially the Silver and Gold series, are built around durable heat exchangers and simple, reliable controls, but their pressure switches and draft inducers still fail over time. We have serviced hundreds of American Standard furnaces in Woodland Hills and keep their OEM pressure switches and inducer motors on our trucks, so most repairs are done in one visit. Whether you have a Carrier, a Trane, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The burners light, then shut off after a few seconds. This usually means a dirty or failing flame sensor, and the furnace will keep trying and failing until the control board locks out. It is a quick fix for a pro, but continuing to reset the furnace can damage the ignitor.
- You hear a loud bang when the furnace kicks on. A delayed ignition can mean the burners are lighting after gas builds up in the chamber, which can crack the heat exchanger over time. Get it checked before the next cold snap.
- The blower runs constantly, but the air coming out is lukewarm or cold. This often points to a failed limit switch, a plugged filter, or a burner issue, and it wastes gas every hour you leave it running. A tech can identify the cause in about an hour.
- Your carbon monoxide detector goes off or you smell gas near the furnace. Shut the system down, open windows, and leave the house. Call 911 or the gas company first, then call us once the immediate risk is cleared.
- The furnace makes a grinding, screeching, or rattling sound. A failing blower motor or inducer motor often announces itself with noise before it quits completely. Catching it early usually means a $200 motor replacement instead of a $700 mid-winter failure.
Our Process, Step by Step
- 1
Book online or call, and get a live arrival time. When you schedule with Halden Heating and Air Woodland Hills, you get a real time window, not a four-hour range, and you can track your tech to the door from your phone. The person who answers the phone is a real person in our office, not a voicemail tree.
- 2
We arrive, listen, and inspect. Our tech asks what you have been hearing, feeling, and smelling from the furnace, then runs a full diagnostic on the system. We use combustion analyzers, manometers, and borescope cameras to check the heat exchanger, gas pressure, and airflow, so we find the actual problem, not just the obvious one.
- 3
You get a written price before any work starts. After the diagnostic, the tech writes down the exact repair, the exact price, and the parts involved, and you approve it before we pick up a tool. That price never changes at the door unless you add work, and we will tell you before that happens too.
- 4
We make the repair and show you what we did. The tech completes the work, tests the furnace through a full heating cycle, and shows you before-and-after photos of the repair. We verify gas pressure, temperature rise, and carbon monoxide levels before we call the job done.
- 5
You get a written guarantee and a clear receipt. Every repair includes a written guarantee, and if the same problem comes back within the coverage window, the second visit is free under our 365-Day Done Right Promise. You leave with the paperwork in hand, not an email that arrives next week.
How Much Does Furnace Repair Cost in Woodland Hills?
A typical gas furnace repair in Woodland Hills runs $150 to $700, and the range breaks down pretty predictably. A flame sensor cleaning or ignitor replacement usually lands at $150 to $300, a pressure switch or limit switch at $200 to $400, and a blower motor or control board at $400 to $700. Heat pump repairs trend toward the upper half of the range because outdoor units have more components exposed to weather and debris, while boiler repairs can hit $500 to $700 when a circulator pump or zone valve needs replacing.
What affects the price is simple: the part, how accessible it is, and how long the repair takes. A furnace in a tight attic or crawlspace takes longer than one in a garage, and an older unit with corroded fasteners can add time too. To avoid overpaying, get the written price before the work starts and ask what the part costs versus the labor, because a good company will tell you plainly. A free estimate from Halden Heating and Air Woodland Hills includes the diagnostic, the written price, and photos of what we found, so you know exactly what you are approving before any money changes hands. Call (559) 245-8195 for a free estimate.
Our Service Area Near Woodland Hills
Halden Heating and Air Woodland Hills covers the city itself plus the surrounding west Valley communities, including Canoga Park, West Hills, Tarzana, Winnetka, Reseda, and Encino. We also run calls into Agoura Hills, Oak Park, Topanga, and Furnace Repair in Calabasas, usually arriving within an hour during normal hours and within two hours on emergency calls. If you are in Simi Valley, our sister team handles Furnace Repair in Simi Valley with the same written pricing and guarantee standards.
Serving Woodland Hills, CA - Our Local Coverage Area
We’re based in the Woodland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Woodland Hills
Furnace repair is the process of diagnosing and fixing whatever is preventing your heating system from working correctly, whether that means a dead ignitor, a dirty flame sensor, a failed blower motor, or a cracked heat exchanger. A furnace repair visit usually includes a full diagnostic, a written price, and the repair itself, which is how Halden Heating and Air Woodland Hills handles every job in Woodland Hills. Most repairs are completed in one visit, and every repair comes with a written guarantee.
Most furnace repairs take between 45 minutes and two hours once the tech arrives, depending on the part and the furnace. Simple fixes like a flame sensor cleaning or ignitor replacement are usually done in under an hour, while a blower motor or control board replacement can take closer to two hours. We carry common parts on the truck, so most repairs are completed same day in Woodland Hills, not scheduled for a return trip.
Furnace repair in Woodland Hills typically runs $150 to $700, with common fixes like flame sensors and ignitors at the lower end and blower motors, control boards, and boiler circulator pumps at the higher end. The exact price depends on the part, the furnace model, and how long the repair takes. Every Halden Heating and Air Woodland Hills repair includes a written price before work starts, so you will never be surprised at the door. Call (559) 245-8195 for a free estimate.
Yes, we service Bryant furnaces throughout Woodland Hills, including the Evolution and Preferred series, and we carry the OEM parts that keep them running. Our techs also work on American Standard, Carrier, Trane, Lennox, Goodman, Rheem, York, and Daikin equipment, with the same written pricing and guarantee on every repair. Whatever furnace you have, we can likely fix it in one visit.
Yes, Halden Heating and Air Woodland Hills answers the phone live 24/7 at (559) 245-8195, and we run emergency furnace repair calls throughout Woodland Hills, Canoga Park, West Hills, and Tarzana. Emergency calls follow the same $150 to $700 repair pricing with no overtime surcharge. If your heat is out on a cold night, call us and we will get a tech moving.
Every repair from Halden Heating and Air Woodland Hills includes a written guarantee, and if the same problem comes back within the coverage window, the second visit is free. That guarantee is written, automatic, and backed by our 365-Day Done Right Promise, not an add-on you have to ask for. We put the guarantee in writing on every completed job, with no fine print surprises.
Clear a path to the furnace and make sure the area around it is free of boxes, storage, or anything that blocks access. If you have pets, keep them in another room while the tech works, and have a list ready of any symptoms you have noticed, like strange noises, short cycling, or rising gas bills. You do not need to do anything else; our tech will handle the diagnostic and show you the written price before starting any work.
Schedule Your Furnace Repair Service in Woodland Hills Today
If your furnace is acting up, call Halden Heating and Air Woodland Hills at (559) 245-8195 for a free, no-obligation estimate. You will get a written price before any work starts, a live arrival time you can track, and a written guarantee on the repair, backed by our 365-Day Done Right Promise. Led by Andre Fuller and serving Woodland Hills since 2004, we are ready 24/7. To see everything else we do, visit our home page or read more about Furnace Repair in Woodland Hills.
Written by Andre Fuller, Owner at Halden Heating and Air Woodland Hills, serving Woodland Hills since 2004.