Furnace & heating
Heat pumps
Ductless mini splits
Carrier
TraneSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Reseda
A new AC installation in Reseda typically costs between $3,500 and $7,500, depending on system size, efficiency rating, and whether your ducts and electrical panel can handle the new equipment. Most jobs take one to two days once equipment arrives. If you’re calling from Reseda, you’ll talk to a live person at (559) 245-8195 and get a written price before any work starts, no exceptions.
We know Reseda homes the way only a local crew can. The single-story ranch houses along Victory Boulevard, the mid-century tracts north of Sherman Way, and the quiet streets off Tampa Avenue all share a common story: original 1950s and 60s construction that predates modern cooling loads. A lot of what we do on AC Repair - Reseda and installation isn’t just bolting in a new condenser. It’s making sure the whole system, ducts, panel, and airflow, actually delivers cold air through a 105°F Valley afternoon without tripping a breaker or freezing a coil.
Call (559) 245-8195 for a free estimate, and we’ll give you a live arrival time you can track to your door.
Why Halden Heating and Air Woodland Hills Is Reseda’s Preferred AC Installation Company
Halden Heating and Air has been doing this since 2004, and Reseda homeowners keep calling us back because we put numbers in writing before a single tool comes off the truck. Our AC Installation team shows up in uniform, background-checked, and with a live arrival time you can follow on your phone. No four-hour windows. No door-step price changes.
We work throughout Reseda neighborhoods, from the homes near Reseda Park to the blocks around Cleveland High School. Every job includes a 365-Day Done Right Promise. If something isn’t right within a year, we come back and make it right. That’s a written guarantee, not a verbal promise. Our technicians carry parts for Carrier, Trane, Lennox, and Goodman equipment, which matters when a Reseda homeowner needs a specific capacitor or control board in the middle of July.
Andre Fuller leads our team, and he holds every technician to The Relay Standard on every visit: written price first, no surprises, and respect for your home. We’re independently owned and operated under the Relay Home Co. network, which means we answer to our customers, not a corporate flowchart.
Styles & brands we work with
Furnace Installation in Reseda
Furnace Installation in Reseda usually pairs with an AC replacement, since a 1960s furnace and a new condenser need to move the same air through the same ducts. A typical furnace swap here runs $150 to $700 for repairs, and a full installation is priced within the same written estimate we give you for the whole HVAC system. Most Reseda furnace installs take a single day when the ductwork is already sized correctly.
What We Check Before the Furnace Goes In
On older Reseda ranches, we test static pressure before connecting a new furnace to existing ducts. If the readings are high, typically above 0.8″ water column, the new blower will work against the ductwork and burn through motors. We tell you that upfront and price the duct fix into the same written estimate, not as a surprise add-on later.
When Reseda Homeowners Should Replace Both Units Together
If your furnace is over 20 years old and your AC condenser has failed, replacing both at once saves labor and avoids mismatched airflow. Many Reseda homes still run original floor furnaces or early forced-air units that cannot deliver the cubic feet per minute a modern AC requires.
HVAC Installation in Reseda
HVAC Installation in Reseda means more than a condenser swap, it’s matching the entire system to the house. A complete installation includes the condenser, evaporator coil, furnace or air handler, thermostat, and often duct sealing or replacement. In Reseda, where summer highs exceed 100°F routinely from June through September, a mismatched install shows up fast as a hot bedroom or a frozen coil.
Why Size and Static Pressure Matter More in Older Reseda Homes
The original galvanized ducts in a 1958 Reseda ranch were sized for far less airflow than today’s SEER2 equipment needs. We run a Manual J load calculation before quoting any HVAC installation in Reseda. That calculation tells us exactly how many Btu your house needs room by room, so you don’t pay for more tonnage than your ducts can handle or end up with a system that short-cycles.
Electrical Panel Upgrades Before an HVAC Install
Modern high-efficiency condensers and heat strips draw more startup amperage than the original 60-amp panels in many Reseda homes. If your panel can’t safely support the new system, we’ll include the service upgrade in your written estimate. You’ll know the full cost before anything is ordered.
Trusted Brands We Service in Reseda
We install and service Carrier, Trane, Lennox, and Goodman systems throughout Reseda, and our technicians are certified on all four brands. That means we can match a new condenser to existing equipment when a partial replacement makes sense, and we stock common Reseda-specific parts locally. Waiting on a shipped control board during a July heat wave isn’t something we ask our customers to do. If you’re replacing a burned-out Goodman compressor on a 1963 ranch off Vanowen Street, we’ll have the right replacement spec’d and ordered within a day, with the install date locked in writing.
Common AC Installation Problems We See in Reseda Homes
- Undersized ductwork on 1950s – 60s tract homes. Original galvanized ducts in Reseda ranches were never designed for today’s airflow requirements. A like-for-like condenser swap on those ducts causes high static pressure, frozen evaporator coils, and blower motor failures by August.
- Electrical panels that can’t support modern equipment. Many Reseda homes still have 60-amp or 100-amp panels. A new high-efficiency condenser with a heat strip can trip the main breaker on the first triple-digit afternoon if the panel isn’t upgraded first.
- Slab-foundation ductwork that’s expensive to access. Reseda’s slab foundations route ducts through concrete, which makes replacement more involved than in a raised-floor home. We inspect and quote that work honestly, including the access costs, before you sign anything.
- Single-zone systems on unbalanced floor plans. The long ranch layouts common in Reseda create hot spots in back bedrooms when a single return serves the whole house. Adding a return or zoning the ducts solves the comfort issue, but it must be planned before the condenser goes in.
See the difference
Before
After
Before
After
Before
AfterPricing for AC Installation in Reseda, CA
A new AC installation in Reseda runs $3,500 to $7,500 for the equipment and labor. The range comes down to system size, efficiency rating, and whether your ducts and electrical panel need work. A basic 2.5-ton replacement in a smaller Reseda ranch lands near the lower end. A 4-ton, high-SEER2 system with duct sealing and a panel upgrade reaches the top of that range. You’ll get the exact number in writing before any equipment is ordered. Estimates are free, and the price we quote is the price you pay. Call (559) 245-8195 and we’ll come out to Reseda, run the calculations, and hand you a fixed written quote.
Pricing at a Glance for Reseda
| Service | Typical Cost in Reseda |
|---|---|
| AC Installation | $3,500 – $7,500 |
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
We Also Serve Cities Near Reseda
Beyond Reseda, our technicians work throughout the surrounding San Fernando Valley. We serve AC Installation in Reseda as well as Winnetka, Tarzana, Encino, and Canoga Park. Many of these neighborhoods share the same 1950s and 60s housing stock, which means the same duct and panel issues show up again and again. We know what to look for before we quote.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Reseda
A like-for-like swap usually disappoints because the original ductwork was sized for equipment from the 1960s, not for today’s SEER2-rated systems. The new condenser demands more airflow, the ducts can’t deliver it, and the result is high static pressure, frozen coils, and a system that runs inefficiently from day one. In Reseda specifically, the dense concentration of original galvanized ducts in slab foundations makes this the most common install mistake we correct. Call (559) 245-8195 and we’ll test your ducts before we quote your new system.
Many Reseda homes need a panel upgrade before a new high-efficiency AC can be installed safely. The original 60-amp and 100-amp panels common in 1950s and 60s tract homes cannot handle the startup draw of modern condensers and heat strips. We’ll check your panel as part of the free estimate and include any upgrade cost in your written quote. No surprises. Call (559) 245-8195 to schedule that check.
We test static pressure to find out. If the reading comes back at or above 0.8 inches of water column, your original ducts are restricting airflow enough to damage the new blower and freeze the evaporator coil. In Reseda ranches with slab foundations, the test tells us whether we can seal the existing ducts or need to replace them with properly sized runs. The written estimate reflects whichever path your house needs.
For most Reseda homes, a SEER2 rating between 15 and 17 delivers the best balance of upfront cost and long-term cooling savings, but only if the ducts can support the airflow. Jumping to a 20 SEER2 unit without fixing duct leakage is a waste of money in a 1950s ranch. We’ll run the numbers for your specific house and show you the payback on any efficiency upgrade before you commit.
Installations fail on those streets in July because the original condensers were 2-ton units and the homes were built with ductwork sized for that exact load. When a new system goes in without a load calculation or duct assessment, the unit short-cycles, the blower motor overheats, and the system fails during the first extended heat wave. We see this pattern every year along Vanowen and Saticoy. The fix is doing the math before the install, not after the callback.
We recently put a 3-ton Rheem heat pump in a 1958 ranch near Vanowen Street after our static pressure test showed 0.9″ w.c. on the original ducts. The panel only had 60 amps, so we upgraded the service first, replaced the corroded evaporator coil, and balanced airflow before the first 105°F stretch. No more 4 p.m. capacitor failures. That’s the difference between a real install and a condenser swap. Call (559) 245-8195 for your free estimate, and we’ll do the same for your Reseda home.
Written by Andre Fuller, Owner at Halden Heating and Air Woodland Hills, serving Reseda since 2004.